Evaluation of tidal marsh restoration: Comparison of selected macroinvertebrate populations on a restored impounded valley marsh and an unimpounded valley marsh within the same salt marsh system in Connecticut,USA

Macroinvertebrates were examined on an impounded valley marsh in Stonington, Connecticut, that has changed from aTypha-dominated system to one with typical salt-marsh vegetation during 13 years following the reintroduction of tidal exchange. Animal populations on this restored impounded marsh were evaluated by comparing them with populations on a nearby unimpounded valley marsh of roughly the same size. Populations of the high marsh snail,Melampus bidentatus Say, were quantitatively sampled along transects that extended from the water-marsh edge to the upland; those of the ribbed mussel,Geukensia demissa Dillwyn, were sampled in low marsh areas on transects along the banks of creeks and mosquito ditches. The occurrence of other marsh invertebrates also was documented, but their abundance was not measured. The mean density ofMelampus was 332±39.6 SE/m² on the restored impounded marsh and 712±56.0 SE/m² on the unimpounded marsh. However, since snails were larger on the restored impounded marsh, the difference in snail biomass was less pronounced than the difference in snail density. MeanMelampus biomass was 4.96±0.52 SE g dry wt/m² on the restored impounded marsh and 6.96±0.52 SE g dry wt/m² on the unimpounded marsh. On the two marshes, snail density and biomass varied in relation to plant cover and other factors. The density and biomass ofGeukensia at the edge of the marsh were comparable on the restored impounded and unimpounded marshes. Mean mussel densities ranged from 80 to 240/m² and mean mussel biomass varied from 24.8–64.8 g dry wt/m² in different low marsh areas. In contrast, below the impoundment dike, meanGeukensia density was 1100±96.4 SE/m² and meanGeukensia biomass was 303.6±33.28 SE g dry wt/m². A consideration of all available evidence leads to the conclusion that the impounded marsh is in an advanced phase of restoration.     

Indonesia's developing forest industry

Indonesia is a major exporter of tropical hardwoods. The country's goal is to establish integrated wood industries by reducing the export of unprocessed sawlogs. The value of hardwood sawlog exports has decreased by twothirds in 1986 dollars since 1978, while the value of hardwood sawnwood and plywood exports has increased sixfold. Sawlog exports are now banned. This article contrasts the official governmental policy on forest industry development with the operational realities of doing business in Indonesia.     

ERODIBILITY OF URBAN BEDROCK AND ALLUVIAL CHANNELS,NORTH TEXAS1

ABSTRACT: Major erosion of urban stream channels is found in smaller basins in the North Texas study area with contributing drainage areas of less than ten square miles. Within these basins, four basic channel types are identified based on bed and bank lithologies: alluvial banks and bottoms, alluvial banks and gravel bottoms, alluvial banks with rock bottoms, and rock banks with rock bottoms. Most channels (75 percent) have alluvial banks with gravel or rock bottoms. Channel slopes are steep (.38 to.76 percent). Rock consists predominantly of shale and limestone. Channel cross sections are divided into the following four zones based on weathering, scour and entrainment mechanisms: soil zone, slake zone, rock zone and bed material zone. Erodibility of the channels is determined using multiple techniques including reach hydraulics and stream power computations, submerged jet testing, slab entrainment thresholds, and slake durability rates. Procedures are based on both empirical and modeled time series estimates of channel erosion. Field and modeled results support rates of erosion of up to four inches per year. Rates are tied to flow regime, climate, and type of channel bed and banks.     

Field testing of particulate matter continuous emission monitors at the DOE Oak Ridge TSCA incinerator. Toxic Substances Control Act

A field study to evaluate the performance of three commercially available particulate matter (PM) continuous emission monitors (CEMs) was conducted in 1999-2000 at the US Department of Energy (DOE) Toxic Substances Control Act (TSCA) Incinerator. This study offers unique features that are believed to enhance the collective US experience with PM CEMs. The TSCA Incinerator is permitted to treat PCB-contaminated RCRA hazardous low-level radioactive wastes. The air pollution control system utilizes MACT control technology and is comprised of a rapid quench, venturi scrubber, packed bed scrubber, and two ionizing wet scrubbers in series, which create a saturated flue gas that must be conditioned by the CEMs prior to measurement. The incinerator routinely treats a wide variety of wastes including high and low BTU organic liquids, aqueous, and solid wastes. The various possible combinations for treating liquid and solid wastes may present a challenge in establishing a single, acceptable correlation relationship for individual CEMs. The effect of low-level radioactive material present in the waste is a unique site-specific factor not evaluated in previous tests. The three systems chosen for evaluation were two beta gauge devices and a light scattering device. The performance of the CEMs was evaluated using the requirements in draft Environmental Protection Agency (EPA) Performance Specification 11 (PS11) and Procedure 2. The results of Reference Method 5i stack tests for establishing statistical correlations between the reference method data and the CEMs responses are discussed.     

Influence of quaternary ammonium on sorption of selected metal cations onto clinoptilolite zeolite

Clay minerals and zeolites have large cation exchange capacities, which enable them to be modified by cationic surfactant to enhance their sorption of organic and anionic contaminants. In this study, the influence of quaternary ammonium surfactants on sorption of five metal cations (Cs+, Sr+, La3+, Pb2+, and Zn2+) onto a clinoptilolite zeolite was investigated. Generally, the metal cation sorption capacity and affinity for the zeolite decreased, indicating that presorbed cationic surfactants blocked sorption sites for metal cations, as the surfactant loading on the zeolite increased. Cesium and Pb2+ sorption was affected to a small extent, indicating that selective sorption for Cs+ and specific sorption for Pb2+ play an important role in addition to cation exchange. Sorption of cationic surfactants on zeolite preloaded with different metal cations showed a strong correlation with the chain length of the surfactant tail group, while the roles of the charges and types of the metal cations were minimal. As the chain length increases, the critical micelle concentration decreases and the surfactant molecules become more hydrophobic, resulting in progressive bilayer coverage. Desorption of presorbed metal cations by cationic surfactants was strongly affected by the surfactant chain length and metal type. More metal cations, particularly Sr2+ and Zn2+, desorbed with an increase in surfactant chain length. The results, in combination with those from organic and oxyanion sorption on surfactant-modified zeolite, may be used for future surfactant modification to target sorption and desorption of a specific type of contaminant or a mixture of different types of contaminants.     

A note on empty bottles

This note examines the second-order conditions of the Massel-Parrish (M-P) model of a beverage market in which a monopolist producer of beverages packaged in ‘private mould’ bottles has monopsony power in the market for the empty bottles. Customers pay only the shelf price if they return the empty bottle; and, the shelf price plus the forfeited deposit if they discard it. The analysis determines directional changes in the optimal shelf price, deposit levels, and unit sales resulting from changes in each of five demand and three supply parameters. Potential effects of current legislation requiring mandatory deposits on all beverage containers are also analysed.     

The variability in nutrient composition of Anaerobic Digestate granules produced from high shear granulation

This study investigates the production of organic fertilizer using Anaerobic Digestate (as a nutrient source) and limestone powder as the raw materials. A two-level factorial experimental design was used to determine the influence of process variables on the nutrient homogeneity within the granules. Increasing the liquid-to-solid ratio during granulation resulted in increased granule nutrient homogeneity. Increasing the processing time and the impeller speed were also found to increase the nutrient homogeneity. In terms of nutrients release into deionized water, the granules effectively released both potassium and phosphate into solution.